Invisiclues

How do I get the Scimitar moving?

1. Look at the control panel.
2. You'll need the catalyst capsule.
3. Put the capsule in the reactor.
4. Close the reactor.
5. Turn on the reactor.
6. Close the entry hatch.
7. Fill the test tank.
8. Open the gate.
9. Start the engine.
10. Open the throttle.
11. Go east.

Should I set my throttle to slow, medium, or fast?

1. It depends on how quickly you want to reach your destination.
2. Remember, the Aquadome is in trouble and your help is needed.
3. On the other hand, you haven't fully tested this sub yet.
4. Set it to slow the first time you play, then experiment later.

The Scimitar is overheating! What should I do?

1. If your throttle is set to slow, relax.
2. It's not?! Better do something quick!
3. Did the program prompt you to press the test button? If so, you know that you should...
4. ...adjust the voltage regulator located in the engine crawl space.
5. Be careful; it's dangerous.

How do I open the engine access panel?

1. Read the sign.
2. Ask Tip for the Universal Tool.
3. Type OPEN THE ACCESS PANEL.

How can I fix the regulator?

1. Open the engine access panel.
2. Enter the engine crawl space.
3. Type FIX THE REGULATOR.

How do I keep from disturbing the machinery in the crawl space?

1. Don't spend any more time than you need in the crawl space.
2. When you are in the crawl space, use the word "carefully" in each command. Example: FIX REGULATOR CAREFULLY.
3. Enter the crawl space, fix the regulator, then leave.
4. The more time you spend in the engine crawl space, the greater your chances of disturbing the machinery.

How do I use the sonarscope?

1. You can use it only in the bay and near the Aquadome.
2. When you look at it, you see a small area around the Scimitar.
3. The sonarscope shows obstacles at the same depth as the Scimitar.
4. To check for obstacles below you, use the Depth Finder.

How do I use the depth finder?

1. Type EXAMINE THE DEPTH FINDER.
2. The Depth Finder tells you how deep you are and how far below you the bottom is.

How do I use the hydrophone?

1. Type LISTEN TO HYDROPHONE.

How do I use the temperature gauge?

1. Type LOOK AT GAUGE.